Mac Power 2000 April

home *** CD-ROM | disk | FTP | other *** search

/ Mac Power 2000 April / MACPOWER-2000-04.ISO.7z / MACPOWER-2000-04.ISO / ODNスターターキット / Microsoft Internet 4.5 / インターネット接続ウィザード4.5 / Internet Setup / Modem Scripts / GeoPort⁄Express Modem CNG / GeoPort_Express Modem CNG next >

Wrap

Text File | 1999-05-24 | 9KB | 499 lines

! Geoport/Express Modem CNG ! Authors: Kris Kreutzman and Enrico Cadorin ! ! Copyright: ｩ 1991-1996 Apple Computer, Inc. All Rights Reserved. ! ! revision history: ! v2.1 as shipped with the ARA 2.1 ! ! 'mlts' resource info for this modem: ! byte 1 == 01 -> modem HAS built-in error correction protocols ! byte 2 == 01 -> modem HAS built-in data compression protocols ! byte 3 == 65 -> max number of chars in varstr 7 ! byte 4 == 65 -> max number of chars in varstr 8 ! byte 5 == 65 -> max number of chars in varstr 9 ! @ORIGINATE @ANSWER ! ! ---- Initial modem setup ---- ! ! Setup the modem for the following: ! Reset to factory settings ! Standard compression/reliablity ! Lock serial port speed ! Serial port hardware handshaking, turn off software handshaking ! Verbose responces and compression/protocol results ! CONNECT returns DCE speed ! Turn off answering ! Reset or return to command mode on DTR toggle (optional) ! @LABEL 3 matchclr matchstr 1 4 "OK¥13¥10" matchstr 2 101 "ERROR¥13¥10" write "AT&FE0S95=40S7=75S0=0¥13" matchread 30 inctries iftries 3 101 ! ! Reset the Modem on setup failure ! DTRClear pause 5 DTRSet flush jump 3 ! ! @LABEL 4 ! Varstring 4 , reliable link protocol: ! = 0, handled by computer (ARAP) ! = 1, handled by modem (PPP) ! = 2, MNP10 protocol (Cellular protocol, no longer supported) ifstr 4 5 "1" ifstr 4 5 "2" ! ! Varstring 4 == 0, turn off reliable link protocol in modem (ARAP) matchclr matchstr 1 9 "OK¥13¥10" write "AT&Q0¥13" matchread 30 jump 101 ! ! @LABEL 5 ! Varstring 5, compression protocol: ! = 0, handled by computer ! = 1, handled by modem ifstr 5 9 "1" ! ! Varstring 5 == 0, turn off compression protocol in modem. matchclr matchstr 1 9 "OK¥13¥10" write "AT%C0S46=136¥13" matchread 30 jump 101 ! ! @LABEL 9 ! Varstring 2, modem speaker: ! = 0, speaker off ! = 1, speaker on ifstr 2 13 "1" pause 5 matchclr matchstr 1 13 "OK¥13¥10" write "ATM0¥13" matchread 30 jump 101 ! ! Modem ready, wait for a call or originate a call ! @LABEL 13 ifANSWER 82 ! ! ! ---- Originating a call ---- ! ! Varstring 6, dialing mode: ! = 0, normal dialing ! = 1, blind dialing ! = 2, manual dialing ! otherwise dial as ARA version 1.0 ifstr 6 19 "0" ifstr 6 17 "1" ifstr 6 15 "2" ! ! Dialing for ARA version 1.0 note "Dialing ^1" 3 write "ATD^3¥^^1¥13 jump 32 ! @LABEL 15 ! Display ASK dialog with message. Goto label 120 if dialog canceled. ASK 2 "Pick up the phone & dial ^1. When the phone rings, click OK then hang up." 120 note "Manual dialing initiated" 3 ! X1 to ignore dialtone & busy, D to dial, ¥^ generates data tone write "ATX1D¥^¥13" jump 32 ! @LABEL 17 note "Dialing without tone" 3 matchclr matchstr 1 19 "OK¥13¥10" ! X1 to ignore dialtone & busy write "ATX1¥13" matchread 30 jump 101 ! ! ! @LABEL 19 ! Display the full dialstring contained in Varstring 1 note "Dialing ^1" 3 ! ! Varstrings 7, 8 and 9, contain dialstring fragments ! Long phone numbers may need to be split into smaller groups ! for the modem to use ! ! Varstring 3: "p" for pulse & "t" for tone dialing ! Varstring 8 == blank (dialstring in varstring 7) ! Varstring 9 == blank (dialstring in varstrings 7 & 8) ! Otherwise (dialstring in varstrings 7, 8 & 9) ! ¥^ is added to the dialstring to force the modem to generate a data tone ifstr 8 27 " " ifstr 9 24 " " ! ! Write dialstring in varstrings 7, 8 & 9 matchclr matchstr 1 21 "OK¥13¥10" write "ATD^3^7;¥13" matchread 400 jump 101 @LABEL 21 matchclr matchstr 1 22 "OK¥13¥10" write "ATD^3^8;¥13" matchread 400 jump 101 @LABEL 22 write "ATD^3¥^^9¥13" jump 32 ! ! @LABEL 24 ! Write dialstring in varstrings 7 & 8 matchclr matchstr 1 25 "OK¥13¥10" write "ATD^3^7;¥13" matchread 400 jump 101 @LABEL 25 write "ATD^3¥^^8¥13" jump 32 ! @LABEL 27 ! Write dialstring in varstring 7 write "ATD^3¥^^7¥13" ! ! ! ---- Connection responce ---- ! ! The following section will parse modem responces of two types: ! 1) PROTOCOL: xxx, COMPRESSION: xxx, CONNECT xxx ! 2) CONNECT xxx/ARQ/V42 ! @LABEL 32 matchclr matchstr 1 81 "RING¥13¥10" matchstr 2 33 "NO " matchstr 3 103 "ERROR¥13¥10" matchstr 4 104 "BUSY¥13¥10" matchstr 5 106 "MODEM IN USE¥13¥10" matchstr 6 107 "DIALING DISABLED¥13¥10" matchstr 7 108 "BLACKLISTED NUMBER¥13¥10" matchstr 8 109 "LINE CURRENT DETECTED¥13¥10" matchstr 9 111 "FORBIDDEN NUMBER¥13¥10" matchstr 10 113 "UNKNOWN COUNTRY CODE¥13¥10" matchstr 11 34 "CONNECT " matchstr 12 60 "PROTOCOL: " matchstr 13 61 "COMPRESSION: " matchread 700 ifANSWER 32 jump 105 ! ! Special parsing of "NO xxx" to keep the number of matchstr above ! below 16 for ARA 1.0 compatability ! @LABEL 33 matchclr matchstr 1 102 "DIALTONE¥13¥10" matchstr 2 103 "CARRIER¥13¥10" matchstr 3 105 "ANSWER¥13¥10" matchstr 4 110 "LINE CURRENT¥13¥10" matchstr 5 112 "DAA¥13¥10" matchread 10 jump 32 ! Parse the speed of connect result codes ! 2400 and 4800 have two entries each ! to distinguish them from 24000 and 48000 ! @LABEL 34 matchclr matchstr 1 40 "2400¥13" matchstr 2 40 "2400/" matchstr 3 41 "4800¥13" matchstr 4 41 "4800/" matchstr 5 42 "7200" matchstr 6 43 "9600" matchstr 7 44 "12000" matchstr 8 45 "14400" matchstr 9 46 "16800" matchstr 10 47 "19200" matchstr 11 48 "21600" matchstr 12 49 "24000" matchstr 13 50 "26400" matchstr 14 51 "28800" matchread 30 jump 59 ! ! -- Connection rates -- ! CommunicatingAt informs ARA of the raw modem to modem ! connection speed. ! @LABEL 40 note "Communicating at 2400 bps." 2 CommunicatingAt 2400 jump 70 ! @LABEL 41 note "Communicating at 4800 bps." 2 CommunicatingAt 4800 jump 70 ! @LABEL 42 note "Communicating at 7200 bps." 2 CommunicatingAt 7200 jump 70 ! @LABEL 43 note "Communicating at 9600 bps." 2 CommunicatingAt 9600 jump 70 ! @LABEL 44 note "Communicating at 12400 bps." 2 CommunicatingAt 12400 jump 70 ! @LABEL 45 note "Communicating at 14400 bps." 2 CommunicatingAt 14400 jump 70 ! @LABEL 46 note "Communicating at 16800 bps." 2 CommunicatingAt 16800 jump 70 ! @LABEL 47 note "Communicating at 19200 bps." 2 CommunicatingAt 19200 jump 70 ! @LABEL 48 note "Communicating at 21600 bps." 2 CommunicatingAt 21600 jump 70 ! @LABEL 49 note "Communicating at 24000 bps." 2 CommunicatingAt 24000 jump 70 ! @LABEL 50 note "Communicating at 26400 bps." 2 CommunicatingAt 26400 jump 70 ! @LABEL 51 note "Communicating at 28800 bps." 2 CommunicatingAt 28800 jump 70 ! @LABEL 59 note "Communicating at an unknown rate." 2 jump 70 ! ! Parse the remainder of the PROTOCOL result ! @LABEL 60 matchclr matchstr 1 62 "LAP-M" matchstr 2 62 "MNP" matchstr 3 62 "ALT" matchstr 4 32 "¥13" matchread 10 jump 32 ! ! Parse the remainder of the COMPRESION result ! @LABEL 61 matchclr matchstr 1 67 "V.42BIS" matchstr 2 67 "MNP5" matchstr 3 67 "CLASS 5" matchstr 4 32 "¥13" matchread 10 ! ! ! -- Modem error correction link negotiation -- ! Userhook 2 informs ARA that a modem-to-modem error ! correcting protocol has been negotiated ! ! @LABEL 62 note "Modem Reliable Link Established." 2 userhook 2 jump 32 ! ! ! -- Compression negotiation -- ! Userhook 3 informs ARA that a modem-to-modem compression ! protocol has been negotiated ! @LABEL 67 note "Modem Compression Established." 2 userhook 3 jump 32 ! ! ! ! -- Normal exit after "CONNECT" -- ! ! This modem has been setup to do CTS handshaking, ! and we assume that a CTS handshaking cable is being used. ! @LABEL 70 ! Turn on CTS handshaking. HSReset 0 1 0 0 0 0 ! ifANSWER 71 pause 30 @LABEL 71 exit 0 ! ! ! ! ---- Answer calls ---- ! ! A RING result from the modem and in ANSWERING mode ! claims the serial port and answering the phone ! @LABEL 81 ifORIGINATE 32 ! note "Answering phone..." 2 jump 32 ! ! Setup for answering calls ! @LABEL 82 matchclr matchstr 1 32 "OK¥13¥10" matchstr 2 101 "ERROR¥13¥10" write "ATS0=1¥13" matchread 30 jump 101 ! ! ! ---- Hang up and reset modem ---- ! @HANGUP @LABEL 90 settries 0 HSReset 0 0 0 0 0 0 ! @LABEL 92 ! Escape from data to command mode matchclr matchstr 1 96 "OK¥13¥10" write "+++" matchread 20 ! @LABEL 94 ! Force a hangup matchclr matchstr 1 98 "NO CARRIER¥13¥10" matchstr 2 98 "OK¥13¥10" matchstr 3 98 "ERROR¥13¥10" matchstr 4 98 "0¥13¥10" write "ATH¥13" matchread 30 ! ! Try to get control of the modem by toggling DTR DTRClear pause 5 DTRSet flush ! ! Try the hangup sequence three times otherwise declare and error inctries iftries 3 101 jump 92 ! @LABEL 96 ! Pause between data and command mode pause 50 jump 94 ! ! @LABEL 98 ! Recall the factory settings pause 15 matchclr matchstr 1 99 "OK¥13¥10" write "AT&F¥13" matchread 30 jump 101 ! @LABEL 99 exit 0 ! ! ---- Error messages ----- ! ! Modem Not Responding @LABEL 101 exit -6019 ! ! No Dial Tone @LABEL 102 exit -6020 ! ! No Carrier or Error @LABEL 103 exit -6021 ! ! Busy @LABEL 104 exit -6022 ! ! No Answer @LABEL 105 exit -6023 ! ! GeoPort/Express modem extended errors ! @LABEL 106 exit -6002 "Modem in use" ! @LABEL 107 exit -6002 "Dialing Disabled" ! @LABEL 108 exit -6002 "Blacklisted Number" ! @LABEL 109 exit -6002 "Line Current Detected" ! @LABEL 110 exit -6002 "No LIne Current" ! @LABEL 111 exit -6002 "Forbidden Number" ! @LABEL 112 exit -6002 "No DAA" ! @LABEL 113 exit -6002 "Unknown Country Code" ! ! User Cancellation @LABEL 120 exit -6008